Select Product

Mixers: Double Balanced Mixers

Double balanced mixers are designed with a single quad diode on a soft substrate and offer optimal VSWR as well as cancellation of even harmonics generated by the mixing of the RF and LO signals. These mixers offer DC coupled IF ports and are good for general utility mixing requirements requiring single stage downconversion to baseband and can be utilized for phase detector and bi-phase modulator requirements. Typical applications are in narrow or broadband receivers with an IF in the DC to 1000 MHz range.

Typical Specification is:
RF/LO Frequency Range 2 - 18 GHz
IF Frequency Range DC - 1000 MHz
Conversion Loss 7 dB
VSWR, RF and LO ports 2:1 typical
Isolation, LO to RF and LO to IF 20 dB minimum
LO drive 13 ± 1 dB
Input Two-Tone Third Order Intercept Point 17 dBm
Operating Temperature Range -54 to +95 °C

 

Double Balanced Mixer Selection Guide
 
Model NumberFrequency (GHZ)Typical ParametersIsolationDimensionsPackage
 RFLOIFTypical
Loss
Nominal
Drive
(dBm)
IIP3
(dBm)
Typical
L-R
Typical
L-I
L"W"Series
MR105L
SMA
 2-18  2-18  DC-.55.5101535201.50.8CP1
MR105M
SMA
2-182-18DC-.56131735201.50.8CP1
MR105H
SMA
2-182-18DC-.56.5172035201.50.8CP1
MR117 SMA
Low 1/f Noise
2-182-18DC-.17101535201.50.8CP1
MR126L
SMA
1-181-18DC-.36101540352.1251.25FP
MR126B SMA
Low 1/f Noise
1-181-18DC-.17101540352.1251.25FP
MR141L
Open Carrier
3-183-18DC-.55.5101530200.60.35OP1
MR141M
Open Carrier
3-183-18DC-.56131730200.60.35OP1
MR141H
Open Carrier
3-183-18DC-.56.5172030200.60.35OP1
MR144L
SMA,GPO
4-184-18DC-1.05.5101530200.80.59VP1
MR144M
SMA,GPO
4-184-18DC-1.06131730200.80.59VP1
MR144H
SMA,GPO
4-184-18DC-1.06.5182030200.80.59VP1
MR144-1L
SMA,GPO
4-184-18DC-2.0512.01430250.80.59VP1
MR147L
Open Carrier
3-183-18DC-.55.5101530250.60.32OP2
MR147M
Open Carrier
3-183-18DC-.55.5131830250.60.32OP2
MR147H
Open Carrier
3-183-18DC-.56182230250.60.32OP2
MR218
Open Carrier
2-182-18DC-.55.591535251.050.5OP3

 

 
HOME :: COMPONENTS :: SUBSYSTEMS :: COMPANY PROFILE :: CONTACTS :: SITE MAP